The principle of Anaklaridov

 

When mixed with the fuel occurs anaklarida speed increase of combustion that causes luminescence of the flame and heat transfer by radiation, which is an order of magnitude above the convective.

Anaklarid causes a rise in the core temperature of the torch, which activates a chain reaction of combustion. By increasing the flame temperature of 10 ° C, the rate of chemical reactions of burning is increased several times. This contributes to the intensification of the combustion process in the kinetic and kinetic difuzionno areas. As a result, fuel is burned in a short flare.

The pyrolysis anaklarida in high temperature zone allocated additional active centers (O, H and OH radicals) enters into the combustion reaction branched chain.
 
 
 
 
 
 
 
 
 
 

WHAT'S HAPPENING
The boiler furnace
BEFORE 
AFTER
Nyzhnyodniprovsky Pipe
SAVING
FUEL OIL
до 8%
CONTRACTION CYCLE
MELTING
на 1,2%
REDUCING HARMFUL
EMISSIONS TO ATMOSPHERE

Tests were conducted on open-hearth furnaces used fuel - gas-oil.

We obtained the following results:

- Oil savings up to 8%;

- The gas savings to 3.8%;

- Reduction of melting cycles of up to 1.2%;

- Increasing the speed set temperature molten metal before 2,3ºS per minute;

- Reduction of harmful emissions into the atmosphere.

Combine the non-ferrous metals
ЭКОНОМИЯ
МАЗУТА
до 25%
ВРЕМЯ РАЗОГРЕВА ПЕЧИ
УМЕНЬШИЛОСЬ В ДВОЕ
ОЧИСТКА СИСТЕМЫ
ПОДАЧИ МАЗУТА

The object of the test - drum oven.

Fuel - Fuel oil.

Test results:

  • Save up to 25% oil;
  • Increasing the combustion flame temperature to 100 ° C;
  • During reheating furnace halved;
  • Application anamegirovanogo possible to reduce the cross-section of oil nozzle, while maintaining the properties of the flame in the furnace;
  • Passed clean fuel oil supply system.
If you have questions or suggestions, you can call or write to us ,
we will be happy to answer them.